The cable sample is put into the testing device and clamped at the designed places.
The desired tensile force has to be defined.
An automatic STOP is possible after the expiry of the programmed time.
Pulling force pneumatic: 100 – 5.000 N
Testing length approx. 600 m
Pulling force hydraulic: 4.000 – 30.000 N
Testing length approx. 600 m
Pulling force hydraulic: 4.000 – 50.000 N
Testing length approx. 360 m
Cable diameter: 5 – 40 mm
According to IEC-794-1-E3-Crush
The cable sample is tightened into the testing device, then pinched between a stationary flat steel plate and a movable 100 mm (length) steel plate whereupon transverse pressure is applied on the cable sample.
The desired pressure has to be defined.
An automatic STOP is possible after the expiry of the programmed time.
This test can be executed automatically and manually.
Measuring unit for calibration of pressure setting including display.
Cycle time adjustable 0 – 300 sec
Steel plates 100 x 100 mm
Pressure 20 – 6.000 N
Cable sample length 500 mm
Cable diameter 3 – 40 mm
According to IEC-794-E4
The cable sample is clamped between two clamping jaws.
A weight which is located on a guiding unit is adjusted and released automatically and moves in free fall downwards onto the cable sample.
An automatic STOP is possible after the expiry of the programmed time.
This test can be executed automatically and manually.
The required mounting equipment for two different cable diameters comes with the testing apparatus.
Q-TWP 1000
This test is aided for filled cables in order to test whether the cables are continuously filled with a substance which prevents water from entering the cable.
The equipment is prepared for simultaneous testing of 6 cable specimens.
Furthermore the apparatus is equipped with water connections for filling and draining.
Head of Water: 1000 mm
Cable diameter: 5 – 40 mm
according to IEC-794-1-E6
Technical Data
Cable diameter: 3 – 40 mm
Bending radius: approx. 10 times wire diameter 50 / 350 mm include
Cycle: 0 – 30 strokes
Tension weights: 1 – 10 kg (10 x 1 kg)
Bending radius 75/100/125/150/175/200/225/250/275/300/325
Clamping device for diameter 5mm and 35mm included
Clamping device for diameter (dimension at buyer`s option)
English
German